hp4106 发表于 2007-9-18 17:15:46

Modeling Laser Cavities using ZEMAX and LASCAD

This article describes work undertaken at the University of Bern to model the cavity of a side-pumped crystal laser. The radiation transferred from the pumping diode array to the laser rod was modeled using the non-sequential mode of ZEMAX. The absorbed flux was then transferred to the LASCAD program where it was transformed into a volumetric gain profile, and the subsequent laser modes were predicted. Excellent agreement between predicted and experimentally obtained results was achieved.

zhujiang 发表于 2007-9-18 20:16:00

好东西！

谢谢了，顶下！

精密仪器设计 发表于 2007-9-18 21:22:02

不知道咋样，下了再说。。。。。

windfy 发表于 2007-9-19 08:07:45

看看再说，可以在光学设计zemax部分贴铁

linkfunlee 发表于 2007-9-19 14:48:31

正好需要方面的资料，谢谢

linkfunlee 发表于 2007-9-19 14:49:37

为什么下不来哦

fenglixifeng 发表于 2007-9-21 11:06:02

哎呀！要金钱呀！晕

opticaldesign 发表于 2007-9-21 14:23:02

楼主 下不来
可以给我发一份吗？
becomefree@sina.com谢谢

太初0001 发表于 2007-9-21 18:58:14

我就比较想要LASCAD的教程

5092 发表于 2008-11-11 16:22:02

下来看看谢谢！！！！！！！！！！！！！！！！！

cxm19851019 发表于 2008-11-11 16:25:13

好东西！！！！！！！！！！！！！！！！！！谢谢

再也不能这样 发表于 2008-11-11 16:37:53

many thanks to hp4106.................................
页: [1] 2
查看完整版本: Modeling Laser Cavities using ZEMAX and LASCAD