查看: 3964|回复: 9

[讨论] 请教:1-3ns 激光器;10khz左右;平均功率1mW以内;是什么激光器》

 火... [复制链接]
发表于 2010-11-6 22:57:20 | 显示全部楼层 |阅读模式
如题,谢谢!
发表于 2010-11-8 20:44:21 | 显示全部楼层
能不能说的再具体一些?
发表于 2010-11-9 08:09:46 | 显示全部楼层
你这个确实说的太笼统了,起马给个波长什么的。
我以前倒是做过一个和你说的参数类似的激光器,是微片式固体激光器,被动调Q,四倍频,输出光波长为266,脉冲宽度为1ns,频率10K,单脉冲能量0.1uJ。
发表于 2010-11-9 13:42:55 | 显示全部楼层
如果出高一些的价格,可以用BBO电光调Q来事先.
如果频率稳定性不要求,可以用Cr/Nd:YAG被动自调Q实现.
发表于 2010-11-9 17:13:35 | 显示全部楼层
半导体激光器,加上光纤放大器,可以搞定
发表于 2010-12-6 11:55:04 | 显示全部楼层
Pulsed ns 532 Laser
Our 532-Q laser heads are just a few cm longer than the well known 1064-Q lasers. The frequency doubling is done with state of the art walk off compensation which leads to a conversion efficiency of more than 50% by just single pass through a non linear crystal. These 532-Q Lasers are well suited for LIDAR (light detection and ranging) as well as LIBS (Laser Induced Breakdown Spectroscopy) applications. We reached output powers up to 500 mW, but here you will receive a much stronger pulse to pulse timing jitter. More details can be found in the corresponding datasheets below. For different specifications, please contact us directly. We also develop customer specified laser systems.

Average Power [mW]
50

Pulse Energy [µJ]
>4

Peak Power [kW]
>2

Pulsewidth [ns]
~2

Reptition Rate [kHz]
0 - 20

Spectral longitudinal mode
Single mode

Spatial mode
TEM00

Pulse to puls jitter [% rms] at 10 kHz
<3

Beam diameter [&micro;m]
~110

Divergency [mrad], full angle
~6

发表于 2010-12-6 11:55:45 | 显示全部楼层
15802915003
发表于 2010-12-7 10:05:29 | 显示全部楼层
皮秒激光器???
发表于 2010-12-7 15:33:51 | 显示全部楼层
普通DFB激光器!
发表于 2010-12-16 22:53:27 | 显示全部楼层
可以找我啊,我可以帮你提供解决方案
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关注公众号

相关侵权、举报、投诉及建议等,请发 E-mail:admin@discuz.vip

Powered by Discuz! X5.0 Licensed © 2001-2026 Discuz! Team.|鄂ICP备17021725号-1

在本版发帖
关注公众号
QQ客服返回顶部